| |
|
|
| |
 |
| |
| |
 |
| Cellboost for Camcorder (CAM2) |
|
 |
 Works with: Sony, Panasonic and Hitachi camcorders.
Adapter cables compatibility:
Sony 1
Works with CCD-TRV, DCR-DVD,
DCR-PC and DCR-TRV series.
Sony 2
Works with DCR-1P, DCR-HC, DCR-IP,
DCR-VX series and DCR-PC.
Panasonic 1
Works with PV-DV, PV-VM, PV-L series,
PV-GS9, PVGS12, PV-GS14 and
PV-GS15.
Panasonic 2/Hitachi 1
Works with Panasonic PV-GS and
VDR-M series.
Works with Hitachi DZ-GX, DZ-MV,
DZ-V, VMD,VME and VMH Series. |
|
 |
|
| |
|
Canon, JVC and Samsung
60 Minutes of Recording Time |
Sony, Panasonic and Hitachi
100 Minutes of Recording Time |
|
|
|
|
| |
|
IMPORTANT: To maximize recording time, make sure your camcorder is
in either the “Record” or “Play” position before you connect Cellboost to
your camcorder.
1. Choose one of the adapters (located at the bottom of this package) which is
compatible with your camcorder (see compatibility listings to the right). Connect the
adapter to the cable attached to the side of Cellboost (see picture below).
2. Remove the cap and align the Cellboost screw-mount with the tripod mount
located on the bottom of your camcorder. Secure Cellboost by tightening the
thumb-wheel (see picture below).
3. Connect the adapter cable to the “DC” or “DC IN” (charging port) of your
camcorder. For Panasonic 2 / Hitachi 1, remove your camcorder’s battery and slide on
the Cellboost battery adapter.
4. Move the ON/OFF switch to the ON position.
Once your Cellboost is empty, please dispose of properly |
|
| |
| |
|
|
|
|
 |
|
|
